Chemical liquid for boiler cleaning GEB 500 ml
- Watch the product:
- Add feedback:
- Code: 6907
- Manufacturer: GEB
- Manufacturer's code: 3283988720147
- Weight: 0.60 kg
- Availability: ŚREDNIA ILOŚĆ
-
- Net Price: €6.04 €7.43
- pcs.
-
Payment in cash, Payment via bank transfer, Online Payments Payment Cards, ApplePay, Google Pay - P24, PayPro SA, Osobista płatność przy odbiorze, Płatność odroczona (tylko dla zweryfikowanych Klientów), eService (card or bank transfer), Zapłacę przy odbiorze listonoszowi, Payment by bank transfer - wait for the proforma invoice to be sent, Zapłacę przy odbiorze kurierowi Inpost
-
Fast Blik payments.
The product is shipped within 24 hours.
We complete the order within 24 hours.
You can return the product within 14 days.
Liquid for chemical cleaning of boiler fireboxes.
Eliminates soot, sulfur deposits, charred dust in the boiler firebox.
PRODUCT ADVANTAGES
- ready to use, no prior preparation required
- increases device efficiency
- protects metals against corrosion
- inhibits the formation of new deposits
HOW TO USE
Turn on the burner until the temperature reaches between 40 and 50 degrees C. Then turn it off. Spray the surface of the firebox walls with a large amount of the liquid. Relight the burner until the temperature reaches between 80 and 90 degrees C. After cooling, vacuum the residues.
No need to disassemble or pre-clean with a brush.
Capacity: 500 ml.
The container has a diffuser.
Eliminates soot, sulfur deposits, charred dust in the boiler firebox.
PRODUCT ADVANTAGES
- ready to use, no prior preparation required
- increases device efficiency
- protects metals against corrosion
- inhibits the formation of new deposits
HOW TO USE
Turn on the burner until the temperature reaches between 40 and 50 degrees C. Then turn it off. Spray the surface of the firebox walls with a large amount of the liquid. Relight the burner until the temperature reaches between 80 and 90 degrees C. After cooling, vacuum the residues.
No need to disassemble or pre-clean with a brush.
Capacity: 500 ml.
The container has a diffuser.
WHY CLEAN THE BOILER
To ensure economical fuel consumption and achieve the declared power and thermal efficiency of the boiler, it is essential to keep the combustion chamber and convection channels properly clean. While using our central heating system correctly, we cannot prevent dirt inside the boiler, which is the heat source. Burning solid fuels causes soot and ash to deposit on the walls of the flue gas ducts. This, in turn, causes a decrease in the boiler's thermal power and an increase in fuel consumption. This is caused by reduced chimney draft and accelerated fuel combustion. Therefore, to prevent deterioration of the thermal properties of our boiler, we should not forget to clean it frequently.
In the boiler's firebox, special attention should be paid to periodic cleaning of microcracks in the automatic grate plate.
Cleaning of convection channels, where volatile ashes settle, should be done systematically every 3 to 7 days, especially when using the boiler in "traditional firebox" mode. An important issue is the frequency of cleaning the central heating boiler. If the fuel burned is coal or suitable quality wood, cleaning once every few weeks should suffice. However, if burning coke, cleaning should be done significantly more often - once every 7 to 10 days. Additionally, once every few years, the boiler should be cleaned of so-called scale. For this, special solutions dissolving deposits are used (e.g., aqueous hydrochloric acid solution).
Tools equipped with the boiler are used for cleaning. Cleaning the boiler's convection channels is enabled by the front cleaning doors and the ignition-filling doors. Additionally, periodic cleaning of the air chamber located at the rear of the boiler, where dust falling from the automatic grate plate accumulates, should be performed. This cleaning is done through the side cleaning door.
For cleaning solid fuel boilers, wire brushes or pokers are used. Large boilers can be cleaned with compressed air. Cleaning is performed through the boiler's cleaning openings, remembering that the flue damper in the flue pipe should be open. Boilers may have numerous such openings located variously (at the top, side, or rear). Remaining ash is cleaned through the cleaning door at the bottom of the boiler using a scraper. After finishing work, remember to hermetically close all cleaning openings.
Cleaning the chimney flue is also important for proper boiler operation.
After the heating season ends or in other cases of planned boiler shutdown, the loaded portion of fuel should be burned out. After extinguishing the boiler and cooling it down, all residues of burned fuel should be removed from the firebox, and the entire boiler should be cleaned and maintained. Maintenance (by oiling) of the internal partitions of the firebox chamber and all moving parts should be performed. During the boiler's downtime, special care should be taken to protect the fuel feeding mechanism to the firebox by lubricating the horizontal guides.
Polish
Czech
German
Slovak
Ukrainian