Blower for boiler, RV-14 R fan with 2-meter cable and draft regulator

Produkty > Dmuchawy i wentylatory > Boiler blower with connection frame 120 x 140 mm

Code: 5719
Producer: EWMAR-NESS
Producer code: 2001230057190

Weight: 2.50kg
Price gros: €56.98
Price net: €46.33

BLOWER FOR BOILER, RVC-14 R FAN WITH 2m CABLE AND DRAFT REGULATOR

The blower (fan) is a device designed to supply air to the combustion chambers of central heating boilers. It can also be used for general ventilation of rooms and technological devices.

TECHNICAL DESCRIPTION

The fan housing is made of steel sheet coated with powder paint. The motor is placed outside the housing, screwed with M4 screws, and protected by a cover made of plastic. The cover serves as protection against touching live parts. The metal fan impeller is mounted directly on the motor shaft. The fan suction flange is protected by a cover preventing finger contact with moving parts (turbine). The fan motor, made with insulation class H, can operate with a voltage speed controller. Controllers must be adapted to work with inductive loads. The fan has a CE conformity declaration. RV-14 type fans are intended for blowing air into central heating boilers and other technological devices at ambient temperatures from -15°C to +40°C and relative humidity up to 95%. The fan is not intended to be used as a standalone device for household or similar use. Basic application - coal dust boilers up to 35 kW, coal stoves.

Parameters

Type of drive motor: Squirrel-cage induction

Rated voltage: 230 V

Rated frequency: 50 Hz

Power consumption: 60 W

Rated current: 0.4 A

Max. capacity: 200 m3/h

Max. pressure: 240 Pa

Speed at max. capacity: 1800 rpm

Speed at max. pressure: 2800 rpm

Type of operation: S1

Operating position: any

Protection rating: IP 20

Basic insulation: Class H

Protection against abnormal use: impedance protection

Sound power level: 62 dB(A)

Weight: 2.0 kg

Minimum supply voltage: 100 V

DIMENSIONS OF THE FRAME AND OUTLET OPENING

External dimensions of the connection frame: width 135 mm, height 95 mm
Dimensions of the outlet opening: width 70 mm, height 50 mm
Hole spacing 105 mm x 85 mm

BLOWER FOR BOILER, RVC-14 R FAN WITH 2m CABLE AND DRAFT REGULATOR

The blower (fan) is a device designed to supply air to the combustion chambers of central heating boilers. It can also be used for general ventilation of rooms and technological devices.

TECHNICAL DESCRIPTION

The fan housing is made of steel sheet coated with powder paint. The motor is placed outside the housing, screwed with M4 screws, and protected by a cover made of plastic. The cover serves as protection against touching live parts. The metal fan impeller is mounted directly on the motor shaft. The fan suction flange is protected by a guard preventing finger contact with moving parts (impeller). The fan motor, made with insulation class H, can operate with a voltage speed controller. Controllers must be adapted to work with inductive loads. The fan has a CE conformity declaration. RV-14 type fans are intended for blowing air into central heating boilers and other technological devices at ambient temperatures from -15°C to +40°C and relative humidity up to 95%. The fan is not intended to operate as a standalone device for household or similar use. Primary application - coal dust boilers up to 35 kW, coal stoves.

Parameters

Type of drive motor: Squirrel-cage induction

Rated voltage: 230 V

Rated frequency: 50 Hz

Power consumption: 60 W

Rated current: 0.4 A

Max. capacity: 200 m3/h

Max. pressure: 240 Pa

Speed at max. capacity: 1800 rpm

Speed at max. pressure: 2800 rpm

Type of operation: S1

Operating position: any