Exhaust fan for fumes - connection diameter 160 mm - chimney extractor

Code: 7322
Producer: ARDEO
Producer code: 2001230073220

Weight: 8kg
Price gros: €250.15
Price net: €203.37

PRODUCT DESCRIPTION

The exhaust fan is used in solid fuel boilers to improve chimney draft. It is especially useful during lighting the boiler or adding fuel because it prevents smoke from escaping into the boiler room.
Mounted on the boiler's flue pipe, the exhaust fan does not limit the natural flue gas draft but only supports it when the fan is turned on.

INSTALLATION, OPERATION, AND MAINTENANCE

The diameter of the boiler flue pipe and the chimney channel cross-section should not be smaller than the diameter of the installed exhaust fan. The device can be installed both horizontally and vertically. Installation on the boiler flue pipe should be done according to the direction of flue gas flow. After mounting the exhaust on the boiler flue pipe, the gap at the installation site should be sealed with silicone resistant up to 600˚C.
The exhaust fan should be turned on in case of smoke coming from the boiler (too weak natural chimney draft).
Maintenance mainly involves periodic cleaning of the inside of the device, especially the fan blades and the internal walls of the exhaust. To do this, turn off the fan power and unscrew the four nuts securing the fan mounting plate. Disconnecting it from the rest of the unit provides access to the fan blades and the inside of its housing. Periodic cleaning ensures free flow of flue gases through the device, which in turn guarantees trouble-free operation of the exhaust and boiler.

PARAMETERS

Inlet - outlet diameter (other sizes can be ordered) - 130mm or 180mm
Maximum fan capacity - 450m3/h
Outer diameter of the impeller - 174mm
Fan weight without motor - 10.5kg
Fan weight with motor - 13.5kg
Dimensions:
- housing height - 24cm
- height with motor - 38cm
- housing width, depth - 24cm
- width with connecting pipes - 33cm

TECHNICAL DATA

Power supply - 230V ~ 50Hz
Ambient temperature - max 45 ºC
Flue gas temperature - max 350ºC
Power consumption - max 44 W
Airflow - max 310m³/h
Pressure - max 270Pa
Number of speeds - 1
Rotational speed - 2900 rpm
Motor capacitor - 1.5µF/450V
Type of operation - continuous
Protection class - IP44
Insulation class - F
Noise level - 65dBA
Weight - ~2.3kg
Power cable length - 0.7 m

PRODUCT DESCRIPTION

The exhaust fan for flue gases is used in solid fuel boilers to improve chimney draft. It is especially useful during lighting the boiler or adding fuel because it prevents smoke from escaping into the boiler room.
Mounted on the boiler's flue pipe, the exhaust fan does not limit the natural draft of the flue gases but only supports it when the fan is turned on.

INSTALLATION, OPERATION AND MAINTENANCE

The diameter of the boiler flue pipe and the chimney duct cross-section should not be smaller than the diameter of the installed exhaust fan for flue gases. The device can be installed both horizontally and vertically. Installation on the boiler flue pipe should be done according to the direction of flue gas flow. After installing the exhaust on the boiler flue pipe, the gap at the installation site should be sealed with silicone resistant up to 600˚C.
The exhaust fan for flue gases should be turned on in case of smoke coming from the boiler (too weak natural chimney draft).
Maintenance mainly involves periodic cleaning of the inside of the device, especially the fan blades and the internal walls of the exhaust. For this purpose, turn off the fan power and unscrew the four nuts securing the fan mounting plate. By disconnecting it from the rest of the unit, access to the fan blades and the inside of its housing is obtained. Periodic cleaning ensures free flow of flue gases through the device and thus trouble-free operation of the exhaust and boiler.

EXHAUST FAN PARAMETERS

Inlet diameter - 160 mm
Maximum fan capacity - 450 m³/h
Outer diameter of the impeller - 174 mm
Fan weight without motor - 10.5 kg
Fan weight with motor - 13.5 kg

It is possible to connect the exhaust fan to other connection sizes using appropriate reducers available in our offer.

DEVICE DIMENSIONS

- housing height - 24 cm
- height with motor - 38 cm
- housing width, depth - 24 cm
- width with connection pipes - 33 cm

MOTOR TECHNICAL DATA

Power supply - 230V ~ 50 Hz
Ambient temperature - max 45 ºC
Flue gas temperature - max 350 ºC
Power consumption - max 44 W
Pressure - max 27 Pa
Number of speeds - 1
Rotational speed - 2900 rpm
Motor capacitor - 1.5 µF / 450V
Type of operation - continuous
Protection class - IP 44
Insulation class - F
Noise level - 65 dBA
Weight - ~2.3 kg
Power cable length - 0.7 m

fan used -9693

Product options