Control panel room regulator thermostat ST-290 V2 wireless version

Produkty > Sterowniki i regulatory > Temperature controllers, controllers room panels

Code: 7423
Producer: TECH
Producer code: 2001230074234

Weight: 1kg
Price gros: €100.24
Price net: €81.50

PRODUCT DESCRIPTION
The ST-290 room thermostat is a universal device for controlling a heating device (e.g. gas, oil, electric boiler or boiler controller). This thermostat is designed to maintain the set temperature in the apartment by sending a signal to the heating device (contact opening) with information about heating the room to the required temperature. The device supports a weekly control program, day/night mode, and manual operation.

There is also a wireless version of the thermostat with an additional signal receiver installed near the boiler controller.

PRINCIPLE OF OPERATION
Control is carried out using the buttons: , , <+>, <-> and . In the main screen view, the user can see the current day of the week, clock, current and set temperature in the apartment, thermostat operating mode, and battery charge level.

Wireless version of the thermostat
The ST-290 room thermostat can optionally be connected to the boiler controller via a wireless signal receiver (ST-290 v2). Such a receiver is connected to the boiler controller using a two-wire cable and communicates with the room thermostat using a radio signal.

The receiver has built-in indicator lights:
- green 1 – signals data reception and lights up during channel change;
- red – indicates receiver operation;
- green 2 – lights up when the room temperature has not reached the set value – the heating device is on.

For the room thermostat to communicate with the wireless receiver, the desired channel must be set. To do this, press and hold the channel change button on the receiver for about 10 seconds – until the first green indicator light turns on. Then change the channel on the room thermostat by pressing and the up arrow. Using the <+> and <–> buttons, set the desired channel and hold the button for about 1 second. The green indicator light on the receiver should go off. Exiting the channel edit by pressing the arrow or will not change the channel.

TECHNICAL DATA
Room temperature setting range - 10°C : 35°C
Power supply voltage batteries - 2xAA, 1.5V
Measurement error - +/- 1°C
Contact load capacity - 1A, 50Hz
Operating temperature - 5°C : 50°C
Dimensions - 135x95x24 [mm]

The ST-290 room thermostat is connected to the boiler controller or heating device (e.g. gas or oil boiler) using a two-wire communication cable.

PRODUCT DESCRIPTION

The ST-290 room thermostat is a universal device for controlling a heating device (e.g., gas, oil, electric furnace or boiler controller). This thermostat is designed to maintain the set temperature in the apartment by sending a signal to the heating device (contact opening) with information about heating the room to the required temperature. The device supports a weekly control program, day/night mode, and manual operation.

There is also a wireless version of the thermostat with an additional signal receiver installed near the boiler controller.

PRINCIPLE OF OPERATION

Control is carried out using the buttons: , , <+>, <-> and . On the main screen view, the user can see the current day of the week, clock, current and set temperature in the apartment, thermostat operating mode, and battery charge level.

Wireless version of the thermostat

The ST-290 room thermostat can optionally be connected to the boiler controller via a wireless signal receiver (ST-290 v2). Such a receiver is connected to the boiler controller using a two-wire cable and communicates with the room thermostat using a radio signal.

The receiver has built-in indicator lights:

- green 1 – indicates data reception and lights up during channel change;

- red – indicates receiver operation;

- green 2 – lights up when the room temperature has not reached the set value – the heating device is on.

To enable the room thermostat to communicate with the wireless receiver, the desired channel must be set. To do this, press and hold the channel change button on the receiver for about 10 seconds – until the first green indicator light turns on. Then change the channel on the room thermostat by pressing and the up arrow. Using the <+> and <–> buttons, set the desired channel and hold the button for about 1 second. The green indicator light on the receiver should turn off. Exiting the channel editing by pressing the up or down arrow will not change the channel.

TECHNICAL DATA

Room temperature setting range - 10°C : 35°C

Power supply voltage batteries - 2xAA, 1.5V

Measurement error - +/- 1°C

Contact load capacity - 1A, 50Hz

Operating temperature - 5°C : 50°C

Dimensions - 135x95x24 [mm]

The ST-290 room thermostat is connected to the boiler controller or heating device (e.g., gas or oil furnace) using a two-wire communication cable.

Product options