Steel brush metal cleaning rod made of round steel FI 40 with M-12 thread

Produkty > Akcesoria do kotłów > Cleaning of the boiler, ramrod, brush, Sadpal, Spalsadz

Code: 4060
Producer: DOMER
Producer code: 5902429316630

Weight: 0.05kg
Price gros: €1.46
Price net: €1.19

STEEL BRUSH, CLEANING ROD FOR BOILER FI 40 WITH M12 THREAD

Special features:

metal brush
size 40 mm
high durability
universal

The brush is intended for cleaning central heating boilers and chimneys. Thanks to the use of high-quality components, it is resistant to the temperatures inside the boiler and easily cleans even the most soiled parts of the stove. Depending on the needs, brushes are made of wire of different lengths, so the brush diameters have a very wide range. The wire is sharp and springy, making cleaning very simple and easy.

PRODUCT DESCRIPTION

The offered brush has a diameter of 40 mm. Brushes of other sizes are available in other listings. You can also purchase complete boiler cleaning sets, brush handles, wires, and scoops.

The summer period is the best time to take care of the stove and chimney. Do not delay your purchase and clean your stove right after the heating season so that you can quickly and easily resume burning in the boiler in autumn.

Additionally, in our other listings, you can buy other cleaning elements, brushes, wires, scoops, and chimney cleaning powders.

WHY CLEAN THE BOILER

To ensure economical fuel consumption and achieve the declared power and thermal efficiency of the boiler, it is necessary to keep the combustion chamber and convection channels properly clean. While using our central heating system correctly, we cannot prevent dirt inside the boiler, which is the heat source. Burning solid fuels causes soot and ash to deposit on the walls of the flue gas ducts. This, in turn, causes a reduction in the boiler's thermal power and an increase in fuel consumption. This is caused by reduced chimney draft and accelerated fuel combustion. Therefore, to prevent deterioration of the thermal properties of our boiler, we should not forget to clean it frequently.

Special attention should be paid to periodically cleaning the micro-cracks in the automatic grate plate in the boiler's combustion chamber.

Cleaning of convection channels, where volatile ashes settle, should be done systematically every 3 to 7 days, especially when using the boiler in "traditional grate" mode. An important issue is the frequency of cleaning the central heating boiler. If the fuel burned is coal or suitable quality wood, cleaning once every few weeks should suffice. However, if burning coke, cleaning should be done more frequently - once every 7 to 10 days. Additionally, once every few years, the boiler should be cleaned from so-called scale. Special solutions dissolving deposits (e.g., aqueous hydrochloric acid solution) are used for this.

Tools equipped with the boiler are used for cleaning. Cleaning the boiler's convection channels is enabled by the front cleaning doors and the ignition-filling doors. Additionally, periodic cleaning of the air chamber located at the rear of the boiler, where dust falling from the automatic grate plate accumulates, should be performed. This cleaning is done through the side cleaning door.

Wire brushes or pokers are used for cleaning solid fuel boilers. Large boilers can be cleaned with compressed air. Cleaning is performed through the boiler's cleaning openings, remembering to keep the flue damper open. Boilers may have numerous such openings located in various places (top, side, or rear). Remaining ash is cleaned through the cleaning door at the bottom of the boiler using a scraper. After finishing work, all cleaning openings must be hermetically closed.

Cleaning the chimney flue is also important for the proper operation of the boiler.

After the heating season ends or in other cases of planned boiler shutdown, the loaded portion of fuel should be burned out. After extinguishing and cooling the boiler, all residues of burned fuel should be removed from the grate and the entire boiler cleaned and maintained. Maintenance (by oiling) of the internal partitions of the combustion chamber and all moving parts should be performed. During the boiler's downtime, special care should be taken to protect the fuel feeding mechanism to the combustion chamber by lubricating the horizontal guides.

Wire brush - cleaning rod.

Material: steel wire.

End: threaded.

Thread: M12

Diameter - FI 40 mm