Zapraszamy do sklepu
http://www.example.com
 Pełna nazwa firmy
ullica nr
kod Miasto
tel. +48 00 0000-000

Steel brush metal cleaning rod made of round steel FI 70 with M-12 thread

Produkty > Akcesoria do kotłów > Cleaning of the boiler, ramrod, brush, Sadpal, Spalsadz
main main
Code: 4053
Producer: DOMER
Producer code: 2001230040536
main
Weight: 0.35kg
Price gros: €1.32
Price net: €1.07

STRONG BRUSH, METAL CLEANING ROD FOR BOILER CLEANING FI 70 WITH M12 THREAD

 

Special features:

  • metal brush

  • size 70 mm

  • high durability

  • universal

 

 
PRODUCT DESCRIPTION

Wire brush - cleaning rod made of steel wire - very durable. Threaded end, M12 thread. Brush diameter 70 mm. Length of bristle spread on the brush 85-95 mm.

WHY CLEAN THE BOILER

To economize fuel consumption and achieve the declared power and thermal efficiency of the boiler, it is necessary to keep the combustion chamber and convection channels properly clean. While using our central heating installation correctly, we cannot prevent dirt inside the boiler, which is the heat source. Burning solid fuels causes soot and ash to deposit on the walls of the flue gas ducts. This, in turn, causes a decrease in the boiler's thermal power and an increase in fuel consumption. This is caused by reduced chimney draft and accelerated fuel combustion. Therefore, to prevent deterioration of the thermal properties of our boiler, we should not forget to clean it frequently.

In the boiler's combustion chamber, special attention should be paid to periodic cleaning of microcracks in the automatic grate plate.

Cleaning of convection channels, where volatile ashes settle, should be done systematically every 3 to 7 days, especially when using the boiler in "traditional grate" mode. An important issue is the frequency of cleaning the central heating boiler. If the fuel burned is coal or suitable quality wood, cleaning once every few weeks should suffice. However, if burning coke, cleaning should be done more frequently - once every 7 to 10 days. Additionally, once every few years, the boiler should be cleaned from so-called scale. For this, special solutions dissolving deposits are used (e.g., aqueous hydrochloric acid solution).

Tools equipped with the boiler are used for cleaning. Cleaning of the boiler's convection channels is enabled by front cleaning doors and firing/loading doors. Additionally, periodic cleaning of the air chamber located at the rear of the boiler, where dust falling from the automatic grate plate accumulates, should be performed. This cleaning is done through the side cleaning door.

For cleaning solid fuel boilers, wire brushes or pokers are used. Large boilers can be cleaned with compressed air. Cleaning is performed through the boiler's cleaning openings, remembering to keep the flue damper open. Boilers may have numerous such openings located variously (top, side, or rear). Remaining ash is cleaned through the lower cleaning door with the help of a scraper. After finishing work, remember to hermetically close all cleaning openings.

Cleaning the chimney flue is also important for proper boiler operation.

After the heating season ends or in other cases of planned boiler shutdown, the loaded portion of fuel should be burned out. After extinguishing the boiler and cooling it down, all residues of burned fuel should be removed from the grate and the entire boiler cleaned and maintained. Maintenance (by oiling) of the internal partitions of the combustion chamber and all moving parts should be performed. During the boiler's downtime, special care should be taken to protect the fuel feeding mechanism to the combustion chamber by lubricating the horizontal guides.

Wire brush - cleaning rod.

Material: steel wire.

End: threaded.

Thread: M12

Diameter - FI 70 mm

The brush is intended for cleaning central heating boilers and chimneys. Thanks to the use of high-quality components, it is resistant to temperatures inside the boiler and easily cleans even the most soiled parts of the stove. Depending on needs, brushes are made of wire of different lengths, so the brush diameters have a very wide range. The wire is sharp and springy, making cleaning very simple and easy.

 

PRODUCT DESCRIPTION

The offered brush has a diameter of 70 mm. Brushes of other sizes are available in other listings. You can also purchase complete boiler cleaning sets, brush handles, wires, and scoops.

The summer period is the best time to take care of the stove and chimney. Do not delay your purchase and clean your stove right after the heating season so that you can quickly and easily resume firing the boiler in autumn.

Additionally, in our other listings, you can buy other cleaning elements, brushes, wires, scoops, and chimney cleaning powders.

 

 
WHY CLEAN THE BOILER

To economize fuel consumption and achieve the declared power and thermal efficiency of the boiler, it is necessary to keep the combustion chamber and convection channels properly clean. While using our central heating installation correctly, we cannot prevent dirt inside the boiler, which is the heat source. Burning solid fuels causes soot and ash to deposit on the walls of the flue gas ducts. This, in turn, causes a decrease in the boiler's thermal power and an increase in fuel consumption. This is caused by reduced chimney draft and accelerated fuel combustion. Therefore, to prevent deterioration of the thermal properties of our boiler, we should not forget to clean it frequently.

In the boiler's combustion chamber, special attention should be paid to periodic cleaning of microcracks in the automatic grate plate.

Cleaning of convection channels, where volatile ashes settle, should be done systematically every 3 to 7 days, especially when using the boiler in "traditional grate" mode. An important issue is the frequency of cleaning the central heating boiler. If the fuel burned is coal or suitable quality wood, cleaning once every few weeks should suffice. However, if burning coke, cleaning should be done more frequently - once every 7 to 10 days. Additionally, once every few years, the boiler should be cleaned from so-called scale. For this, special solutions dissolving deposits are used (e.g., aqueous hydrochloric acid solution).

Tools equipped with the boiler are used for cleaning. Cleaning of the boiler's convection channels is enabled by front cleaning doors and firing/loading doors. Additionally, periodic cleaning of the air chamber located at the rear of the boiler, where dust falling from the automatic grate plate accumulates, should be performed. This cleaning is done through the side cleaning door.

For cleaning solid fuel boilers, wire brushes or pokers are used. Large boilers can be cleaned with compressed air. Cleaning is performed through the boiler's cleaning openings, remembering to keep the flue damper open. Boilers may have numerous such openings located variously (top, side, or rear). Remaining ash is cleaned through the lower cleaning door with the help of a scraper. After finishing work, remember to hermetically close all cleaning openings.

Cleaning the chimney flue is also important for proper boiler operation.

After the heating season ends or in other cases of planned boiler shutdown, the loaded portion of fuel should be burned out. After extinguishing the boiler and cooling it down, all residues of burned fuel should be removed from the grate and the entire boiler cleaned and maintained. Maintenance (by oiling) of the internal partitions of the combustion chamber and all moving parts should be performed. During the boiler's downtime, special care should be taken to protect the fuel feeding mechanism to the combustion chamber by lubricating the horizontal guides.


STRONG BRUSH, METAL CLEANING ROD FOR BOILER CLEANING FI 70 WITH M12 THREAD

 

Special features:

  • metal brush

  • size 70 mm

  • high durability

  • universal

 

 
PRODUCT DESCRIPTION

Wire brush - cleaning rod made of steel wire - very durable. Threaded end, M12 thread. Brush diameter 70 mm. Length of bristle spread on the brush 85-95 mm.

WHY CLEAN THE BOILER

To economize fuel consumption and achieve the declared power and thermal efficiency of the boiler, it is necessary to keep the combustion chamber and convection channels properly clean. While using our central heating installation correctly, we cannot prevent dirt inside the boiler, which is the heat source. Burning solid fuels causes soot and ash to deposit on the walls of the flue gas ducts. This, in turn, causes a decrease in the boiler's thermal power and an increase in fuel consumption. This is caused by reduced chimney draft and accelerated fuel combustion. Therefore, to prevent deterioration of the thermal properties of our boiler, we should not forget to clean it frequently.

In the boiler's combustion chamber, special attention should be paid to periodic cleaning of microcracks in the automatic grate plate.

Cleaning of convection channels, where volatile ashes settle, should be done systematically every 3 to 7 days, especially when using the boiler in "traditional grate" mode. An important issue is the frequency of cleaning the central heating boiler. If the fuel burned is coal or suitable quality wood, cleaning once every few weeks should suffice. However, if burning coke, cleaning should be done more frequently - once every 7 to 10 days. Additionally, once every few years, the boiler should be cleaned from so-called scale. For this, special solutions dissolving deposits are used (e.g., aqueous hydrochloric acid solution).

Tools equipped with the boiler are used for cleaning. Cleaning of the boiler's convection channels is enabled by front cleaning doors and firing/loading doors. Additionally, periodic cleaning of the air chamber located at the rear of the boiler, where dust falling from the automatic grate plate accumulates, should be performed. This cleaning is done through the side cleaning door.

For cleaning solid fuel boilers, wire brushes or pokers are used. Large boilers can be cleaned with compressed air. Cleaning is performed through the boiler's cleaning openings, remembering to keep the flue damper open. Boilers may have numerous such openings located variously (top, side, or rear). Remaining ash is cleaned through the lower cleaning door with the help of a scraper. After finishing work, remember to hermetically close all cleaning openings.

Cleaning the chimney flue is also important for proper boiler operation.

After the heating season ends or in other cases of planned boiler shutdown, the loaded portion of fuel should be burned out. After extinguishing the boiler and cooling it down, all residues of burned fuel should be removed from the grate and the entire boiler cleaned and maintained. Maintenance (by oiling) of the internal partitions of the combustion chamber and all moving parts should be performed. During the boiler's downtime, special care should be taken to protect the fuel feeding mechanism to the combustion chamber by lubricating the horizontal guides.

Wire brush - cleaning rod.

Material: steel wire.

End: threaded.

Thread: M12

Diameter - FI 70 mm

The brush is intended for cleaning central heating boilers and chimneys. Thanks to the use of high-quality components, it is resistant to temperatures inside the boiler and easily cleans even the most soiled parts of the stove. Depending on needs, brushes are made of wire of different lengths, so the brush diameters have a very wide range. The wire is sharp and springy, making cleaning very simple and easy.

 

PRODUCT DESCRIPTION

The offered brush has a diameter of 70 mm. Brushes of other sizes are available in other listings. You can also purchase complete boiler cleaning sets, brush handles, wires, and scoops.

The summer period is the best time to take care of the stove and chimney. Do not delay your purchase and clean your stove right after the heating season so that you can quickly and easily resume firing the boiler in autumn.

Additionally, in our other listings, you can buy other cleaning elements, brushes, wires, scoops, and chimney cleaning powders.

 

 
WHY CLEAN THE BOILER

To economize fuel consumption and achieve the declared power and thermal efficiency of the boiler, it is necessary to keep the combustion chamber and convection channels properly clean. While using our central heating installation correctly, we cannot prevent dirt inside the boiler, which is the heat source. Burning solid fuels causes soot and ash to deposit on the walls of the flue gas ducts. This, in turn, causes a decrease in the boiler's thermal power and an increase in fuel consumption. This is caused by reduced chimney draft and accelerated fuel combustion. Therefore, to prevent deterioration of the thermal properties of our boiler, we should not forget to clean it frequently.

In the boiler's combustion chamber, special attention should be paid to periodic cleaning of microcracks in the automatic grate plate.

Cleaning of convection channels, where volatile ashes settle, should be done systematically every 3 to 7 days, especially when using the boiler in "traditional grate" mode. An important issue is the frequency of cleaning the central heating boiler. If the fuel burned is coal or suitable quality wood, cleaning once every few weeks should suffice. However, if burning coke, cleaning should be done more frequently - once every 7 to 10 days. Additionally, once every few years, the boiler should be cleaned from so-called scale. For this, special solutions dissolving deposits are used (e.g., aqueous hydrochloric acid solution).

Tools equipped with the boiler are used for cleaning. Cleaning of the boiler's convection channels is enabled by front cleaning doors and firing/loading doors. Additionally, periodic cleaning of the air chamber located at the rear of the boiler, where dust falling from the automatic grate plate accumulates, should be performed. This cleaning is done through the side cleaning door.

For cleaning solid fuel boilers, wire brushes or pokers are used. Large boilers can be cleaned with compressed air. Cleaning is performed through the boiler's cleaning openings, remembering to keep the flue damper open. Boilers may have numerous such openings located variously (top, side, or rear). Remaining ash is cleaned through the lower cleaning door with the help of a scraper. After finishing work, remember to hermetically close all cleaning openings.

Cleaning the chimney flue is also important for proper boiler operation.

After the heating season ends or in other cases of planned boiler shutdown, the loaded portion of fuel should be burned out. After extinguishing the boiler and cooling it down, all residues of burned fuel should be removed from the grate and the entire boiler cleaned and maintained. Maintenance (by oiling) of the internal partitions of the combustion chamber and all moving parts should be performed. During the boiler's downtime, special care should be taken to protect the fuel feeding mechanism to the combustion chamber by lubricating the horizontal guides.

Product options