Zapraszamy do sklepu
http://www.example.com
 Pełna nazwa firmy
ullica nr
kod Miasto
tel. +48 00 0000-000

Blower for WPA X2 feed boiler with flap

Produkty > Dmuchawy i wentylatory > Boiler blower with connection frame 65 x 105 mm
main main
Code: 12290
Producer code: 2001230122904
Price gros: €39.24
Price net: €31.90

WPA X2 K with flap

Purpose:

The fan is designed for blowing air into the combustion chambers of central heating boilers. It can also be used for general ventilation of rooms and technological devices. The WPA X2 K flap fan can operate at ambient temperatures from -25 ºC to +40 ºC.

The fan is intended for blowing in boilers from 16 to 35 kW.

Data:

  • Motor type: CS2E/120-XX01-FT
  • Rated voltage: 230V / 50Hz
  • Max pressure: 360 Pa
  • Max flow rate: 255 m3/h
  • Rotational speed: 2470 rpm
  • Power consumption: 67 W
  • Weight: 2.1 kg
  • Capacitor capacity: 2 μF
  • Permissible ambient temperature: -25 ºC to +40 ºC
  • Impeller material: galvanized steel

WPA X2 K with flap

Purpose:

The fan is designed for blowing air into the combustion chambers of central heating boilers. It can also be used for general ventilation of rooms and technological devices. The WPA X2 K flap fan can operate in ambient temperatures from -25 ºC to +40 ºC.

The fan is intended for blowing in boilers from 16 to 35 kW.

Data:

  • Motor type: CS2E/120-XX01-FT
  • Rated voltage: 230V / 50Hz
  • Max pressure: 360 Pa
  • Max flow rate: 255 m3/h
  • Rotational speed: 2470 rpm
  • Power consumption: 67 W
  • Weight: 2.1 kg
  • Capacitor capacity: 2 μF
  • Permissible ambient temperature: -25 ºC to +40 ºC
  • Impeller material: galvanized steel

 

Construction:

The fan consists of two parts of an aluminum housing, in which the induction motor is mounted. The inlet opening is protected by a mesh. The outlet opening is finished with a flange with holes for mounting. The fan can operate in any position. The metal impeller is mounted directly on the motor shaft. The blower is equipped with a cable with a plug. The inlet opening is protected by a mesh. The outlet opening is finished with a flange with holes for mounting. The flap with weights cuts off uncontrolled air supply when the blower stops working.

Installation:

Thanks to the compact housing, the fan can be mounted directly on the outlet duct or to the technological device using a connection flange with M5 or M6 screws.

 

Data:

  • Motor type: CS2E/120-XX01-FT
  • Rated voltage: 230V / 50Hz
  • Max pressure: 360 Pa
  • Max flow rate: 255 m3/h
  • Rotational speed: 2470 rpm
  • Power consumption: 67 W
  • Weight: 2.1 kg
  • Capacitor capacity: 2 μF
  • Permissible ambient temperature: -25 ºC to +40 ºC
  • Impeller material: galvanized steel