Screw feeder retort for boiler cast iron furnace Ekoenergia 10 - 15 kW 5 Class and EcoDesign switch L/R

Code: 12938
Producer: EKOENERGIA
Producer code: 2001230129385

Weight: 100kg
Price gros: €665.22
Price net: €540.83

Basic description:

The solid fuel burner with a new generation screw feeder is a solution that allows the use of a wide range of fuels in the form of loose material and granulate from 0-32mm. The main fuel is coal with a granulation of 0-32mm (from dust to pea coal). The design of the new burner nozzle and the use of a new fuel feeding method allow the use of so-called difficult fuels, e.g. coals with a high caking number, which tend to form clinkers in the furnace. The feeder construction uses cast iron, while the screw is made of spheroidal cast iron. This increases corrosion resistance, providing the user with longer durability. This is very important when using coal dust, which does not occur in a dry state (remember that coal contains sulfur, which with moisture increases corrosion). The use of cast iron reduces the noise of the feeder operation and shows less tendency to transmit vibrations to other boiler components. Cast iron is resistant to deformation caused by temperature, which is important for the screw, which heats up strongly during fuel lowering in the furnace. The Ekoenergia 10 -15 kW 5 Class and EcoDesign left/right switch screw feeder is equipped with a gear motor. The gear motor housing is made of aluminum alloy. The drive motor of the reducer has a CE conformity declaration. It is characterized by very high durability and workmanship. The motor power in the applied gear motor is 0.09 kW (90 W). The gear motor rotates at a speed of 1 revolution per minute. The bushing in the gear motor has a diameter of 25 mm. It is connected to the screw with a cotter pin. Manufacturers recommend a 5 mm diameter screw with a partial thread as a cotter pin; a full thread weakens the properties of the cotter pin - screw. The screw hardness is 8.8. The product in its current form is refined and tested, worthy of recommendation.

These feeders are used in boilers heating areas up to 120 m2. However, this depends on the building volume, insulation level, and the fuel used.

The Ekoenergia 10 - 15 KW feeder is intended for cooperation with boilers in class 5 and EcoDesign.

The sold set includes:

screw feeder with screw (cast iron parts)
burner in the form of a cast iron firebox (square)
gear motor
power cable for the gear motor, 3 m long

Special features:

universal feeder for pea coal and dust
cast iron firebox
maximum power 15 kW
Polish production
cast iron screw

THE FEEDER BURNS ECO-PEA COAL AND DUST

Basic description:

The solid fuel burner with a new generation screw feeder is a solution that allows the use of a wide range of fuels in the form of loose material and granulate from 0-32mm. The main fuel is coal with granulation 0-32mm (from dust to pea coal). The design of the new burner nozzle and the use of a new fuel feeding method allow the use of so-called difficult fuels, e.g. coals with a high rogi number (caking ability), which tend to form clinkers in the firebox. The feeder construction uses cast iron, while the screw is made of spheroidal cast iron. This increases corrosion resistance, providing the user with longer durability. This is very important when using coal dust, which does not occur in a dry state (remember that coal contains sulfur, which with moisture increases corrosion). The use of cast iron reduces the noise of the feeder operation and shows less tendency to transmit vibrations to other boiler components. Cast iron is resistant to deformation caused by temperature, which is important for the screw, which heats up strongly when lowering fuel in the firebox. The Ekoenergia 10 - 15 kW 5 Class and EcoDesign left/right switch screw feeder is equipped with a gear motor. The gear motor housing is made of aluminum alloy. The drive motor of the reducer has a CE conformity declaration. It is characterized by very high durability and workmanship. The motor power in the applied gear motor is 0.09 kW (90 W). The gear motor rotates at a speed of 1 revolution per minute. The bushing in the gear motor has a diameter of 25 mm. It is connected to the screw with a cotter pin. Manufacturers recommend a 5 mm diameter screw with a partial thread as a cotter pin; a full thread weakens the properties of the cotter pin - screw. The screw hardness is 8.8. The product in its current form is refined and tested, worthy of recommendation.

These feeders are used in boilers heating areas up to 120 m2. However, this depends on the building volume, insulation level, and the fuel used.

The Ekoenergia 10 - 15 KW feeder is designed to work with boilers in class 5 and EcoDesign.

The sold set includes:

screw feeder with screw (cast iron parts)
burner in the form of a cast iron firebox (square)
gear motor
power cable for the gear motor, 3 m long

Special features:

universal feeder for pea coal and dust
cast iron firebox
maximum power 15 kW
Polish production
cast iron screw

THE FEEDER BURNS ECO-PEA COAL AND DUST

Product options