Concrete deflector with hook for boiler with feeder 15-25 kW

Code: 13494
Producer: DOMER
Producer code: 2001230134945

Weight: 5.50kg
Price gros: €22.20
Price net: €18.05

WARNING! Do not install the cold deflector immediately after receiving the shipment. It is recommended to place the deflector on the flue pipe so that it gradually reaches the temperature inside the boiler. Incorrect installation may cause faster wear, cracks, or even breakage of the deflector right after ignition, which is not subject to warranty claims.

Product description:

Deflector for a boiler with a screw feeder, also called a radiant or fire breaker. For feeders from 15 to 25 kW. Made of the highest quality cast iron. It has standard dimensions, making it suitable for most feeders within this power range. It can also be used in feeders of other power ratings than those listed, provided that the feeder manufacturer recommends using a radiant of this diameter. The deflector comes with a hook. It has an internal M12 threaded hole. This allows adjusting the appropriate height at which the deflector will hang above the firebox as needed. The recommended height for placing the deflector above the firebox is about 15 cm. Due to the heavy weight of this element, shipping is via courier. The deflector mounted in the boiler above the burner is designed to mix exhaust gases and air and maintain a high temperature in the combustion environment. It is usually a very flat cast iron or ceramic cylinder, with a diameter of 200-300mm and a height of 10-15mm (cast iron) or 30-50mm (ceramic), mounted at a height of 100-150mm above the upper edge of the burner. Numerous studies have conclusively proven that its presence is essential from the perspective of exhaust gas cleanliness and heat exchanger efficiency.

Dimensions:

• A - 30 mm
• D - 180 mm
• C - 110 mm
• Thread: M12

WARNING! Do not install the cold deflector immediately after receiving the shipment. It is recommended to place the deflector on the flue pipe so that it gradually reaches the temperature inside the boiler. Incorrect installation may cause faster wear, cracks, or even breakage of the deflector right after ignition, which is not subject to warranty claims.

Product description:

Deflector for a boiler with a screw feeder, also called a radiant or fire breaker. For feeders from 15 to 25 kW. Made of the highest quality cast iron. It has standard dimensions, making it suitable for most feeders within this power range. It can also be used in feeders of other power ratings than those listed, provided that the feeder manufacturer recommends using a radiant of this diameter. The deflector comes with a hook. It has an internal M12 threaded hole. This allows adjusting the appropriate height at which the deflector will hang above the firebox as needed. The recommended height for placing the deflector above the firebox is about 15 cm. Due to the heavy weight of this element, shipping is via courier. The deflector mounted in the boiler above the burner is designed to mix exhaust gases and air and maintain a high temperature in the combustion environment. It is usually a very flat cast iron or ceramic cylinder, with a diameter of 200-300mm and a height of 10-15mm (cast iron) or 30-50mm (ceramic), mounted at a height of 100-150mm above the upper edge of the burner. Numerous studies have conclusively proven that its presence is essential from the perspective of exhaust gas cleanliness and heat exchanger efficiency.

Dimensions:

• A - 30 mm
• D - 180 mm
• C - 110 mm
• Thread: M12

Product options