corrosion and sludge protection fluid G11 GEB

Produkty > Akcesoria do kotłów > Cleaning of the boiler, ramrod, brush, Sadpal, Spalsadz

Code: 15797
Producer code: 2001230157975
Price gros: €32.02
Price net: €26.03

Special features:

1 L packaging
protects the central heating system
for underfloor and traditional systems

Protects radiator and underfloor heating installations against corrosion, sludge, scale, and microorganisms.

Properties :

• Protects all metal installations (steel, copper alloys, brass, aluminum, etc.).

• Protects all plastic installations (PP, PEX, PVC, etc.).

• 1 l is enough to protect an installation with a capacity of 100 l.

Properties

Form - Orange liquid
Density - 1.09
pH at 20°C - 8.1
Water hardness in the system - Works regardless of water type (municipal water, softened water)
Material compatibility - Copper brass - Steel, cast iron, galvanized steel, stainless steel, aluminum - PVC, PER, PEX, PB, PP
Compatibility with other products - Compatible with all products belonging to the HVAC GEB range. - Compatible with antifreeze products without additional substances.
Compatibility with devices - Compatible with most devices. Does not damage radiators and boiler valves.

Usage - Preparation:

Before using the product, it is recommended to clean the installation. Cleaning is advisable if the installation is over 5 years old, the water in the circuit is contaminated with sludge, and the lower part of the radiators is cold. For effective cleaning of the installation, use G30 PDO.
Turn off the boiler (and circulation pump).
Drain the installation of a volume corresponding to the volume of the product to be introduced (at the boiler level or the lower part of the installation).

Instructions

Follow the dosing instructions. The product can be introduced through the manifold supplying underfloor heating, through the highest part of the installation (the highest plug with an air vent valve), or using a pump.
Refill water to restore operating pressure.
Restart the installation.
Turn on the circulation pump for at least 30 minutes to distribute the solution well.
Bleed the radiators to remove all air.
Leave the product in the installation. The installation is protected (the product protects the installation for an average of 5 years) and can function normally again.
It is recommended to note down information regarding the product application (product name, date, ...)
If a large amount of water or antifreeze product is added, remember to add G10 INHIBITOR or G11 UNIVERSAL INHIBITOR to maintain the proper concentration of the product in the circuit.

Advice - To know the exact volume of the installation, remember these readings:

before the first filling of a new installation or before filling the installation after cleaning, check the water meter reading (V1)
fill with water
check the water meter reading (V2)
The amount of water in the system equals the difference: Ve = V2 – V1

Storage

Store at temperatures from +5°C to +30°C.

The expiration date indicated on the packaging refers to the product in unopened packaging and stored at 20 °C under normal humidity conditions.

Notes

Product G11 UNIVERSAL INHIBITOR: read the instructions before use, the empty packaging cannot be reused. Waste of this product should be delivered to a recycling center or disposed of according to applicable local regulations.

Product options