Catalyst for soot combustion SPALSADZ bag 1 kg

Produkty > Akcesoria do kotłów > Cleaning of the boiler, ramrod, brush, Sadpal, Spalsadz

Code: 5453
Producer: CHEM POINT
Producer code: 2001230054533

Weight: 1kg
Price gros: €2.20
Price net: €1.79

WHY CLEAN THE BOILER

To ensure economical fuel consumption and achieve the declared power and thermal efficiency of the boiler, it is essential to keep the combustion chamber and convection channels properly clean. While using our central heating system correctly, we cannot prevent dirt buildup inside the boiler, which is the heat source. Burning solid fuels causes soot and ash to deposit on the walls of the flue gas ducts. This, in turn, causes a reduction in the boiler's thermal power and an increase in fuel consumption. This is caused by reduced chimney draft and accelerated fuel combustion. Therefore, to prevent deterioration of the thermal properties of our boiler, we should not forget to clean it frequently.

In the boiler's combustion chamber, special attention should be paid to periodic cleaning of the micro-gaps in the automatic grate plate.

Cleaning of the convection channels, where volatile ashes settle, should be done systematically every 3 to 7 days, especially when operating the boiler in "traditional grate" mode. An important issue is the frequency of cleaning the central heating boiler. If the fuel we burn is coal or suitable quality wood, cleaning once every few weeks should suffice. However, if we burn coke, it should be done significantly more often – once every 7 to 10 days. Additionally, once every few years, the boiler should be cleaned of so-called scale. For this, special solutions dissolving deposits are used (e.g., aqueous hydrochloric acid solution).

Tools equipped with the boiler are used for cleaning. Cleaning the boiler's convection channels is enabled by the front cleaning doors and the ignition-filling doors. Additionally, periodic cleaning of the air chamber located at the rear of the boiler, where dust falling from the automatic grate plate accumulates, should be performed. This cleaning is done through the side cleaning door.

For cleaning solid fuel boilers, wire brushes or pokers are used. Large boilers can be cleaned with compressed air. Cleaning is carried out through the boiler's cleaning openings, remembering that the flue damper in the smoke pipe should be open. Boilers may have numerous such openings located in various places (top, side, or rear). Remaining ash is cleaned through the cleaning door at the bottom of the boiler using a scraper. After finishing the work, we must remember to hermetically close all cleaning openings.

Cleaning the chimney flue is also important for the proper operation of the boiler.

After the heating season ends or in other cases of planned boiler shutdown, the loaded portion of fuel should be allowed to burn out. After extinguishing the boiler and cooling it down, all residues of burned fuel should be removed from the grate, and the entire boiler should be cleaned and maintained. Maintenance should include lubricating the internal partitions of the combustion chamber and all moving parts with oil. During the boiler's downtime, special care should be taken to protect the fuel feeding mechanism to the combustion chamber by lubricating the horizontal guides.

SPALSADZ improves the durability and efficiency of boilers, fireplaces, and central heating stoves.

It eliminates soot and coke by burning them off. Unburned hydrocarbons, including benzopyrene, are burned along with the soot. Carbon monoxide oxidizes to carbon dioxide.

Using the SPALSADZ preparation causes:
- cleaning action on boiler surfaces
- improvement of combustion processes - reduction of solid particle lift and carbon dioxide concentration in flue gases
- reduction of SO2 emissions
- limitation of high and low temperature corrosion
- reduction of dust pollution.

Systematic use of SPALSADZ in the proportion of 1-2 kg per 1 ton of coal causes the elimination of deposits - scale in the stove and heating installation, maintaining their efficiency during the heating period.

Thanks to this, downtime for cleaning the stove is short and only involves cleaning ash from the rear part of the stove. After using SPALSADZ - as a result of burning off the binder which is soot - the crust (deposits) changes its structure, loosens, and falls off. A new coating is burned off continuously - the stove walls remain clean. SPALSADZ does not cause glazing (screens) of heating elements - it does not contain dolomite in its composition.

Due to the above advantages, it is widely used in the operation of boilers fired with coal, dust coal, coke, wood, peat, brown coal, both in small, medium, and large boiler rooms. It fundamentally improves boiler efficiency by keeping the boiler walls clean. Every millimeter of deposit (slag, scale) on the stove wall increases solid fuel consumption by 10%. Using the SPALSADZ preparation allows saving up to 20% on fuel costs!!

WHY CLEAN THE BOILER

To economize fuel consumption and achieve the declared power and thermal efficiency of the boiler, it is necessary to keep the combustion chamber and convection channels properly clean. While using our central heating installation properly, we cannot prevent contamination inside the boiler, which is the heat source. Burning solid fuels causes soot and ash to deposit on the walls of the flue gas ducts. This, in turn, causes a reduction in the boiler's thermal power and an increase in fuel consumption. This is caused by reduced chimney draft and accelerated fuel combustion. Therefore, to prevent deterioration of the thermal properties of our boiler, we should not forget to clean it frequently.

In the boiler's combustion chamber, special attention should be paid to periodic cleaning of microcracks in the automatic grate plate.

Cleaning of convection channels, where volatile ashes settle, should be done systematically every 3 to 7 days, especially when using the boiler in "traditional grate" mode. An important issue is the frequency of cleaning the central heating boiler. If the fuel burned is coal or appropriate quality wood, cleaning once every few weeks should suffice. However, if we burn coke, cleaning should be done significantly more often - once every 7 to 10 days. Once every few years, the boiler should be cleaned from so-called scale. For this, special solutions dissolving deposits are used (e.g., aqueous hydrochloric acid solution).

Tools equipped with the boiler are used for cleaning. Cleaning the boiler's convection channels is enabled by front cleaning doors and firing/loading doors. Additionally, periodic cleaning of the air chamber located at the rear of the boiler, where dust falling from the automatic grate plate accumulates, should be performed. This cleaning is done through the side cleaning door.

For cleaning solid fuel boilers, wire brushes or pokers are used. Large boilers can be cleaned with compressed air. Cleaning is performed through the boiler's cleaning openings, remembering to keep the flue damper open. Boilers may have numerous such openings located variously (at the top, side, or rear). Remaining ash is cleaned through the cleaning door at the bottom of the boiler with the help of a scraper. After finishing work, we must remember to hermetically close all cleaning openings.

Cleaning the chimney flue is also essential for proper boiler operation.

After the heating season or in other cases of planned boiler shutdown, the loaded portion of fuel should be burned out. After extinguishing the boiler and cooling it down, all residues of burned fuel should be removed from the grate and the entire boiler cleaned and maintained. Maintenance should include lubricating the internal partitions of the combustion chamber and all moving parts with oil. During the boiler downtime, special care should be taken to protect the fuel feeding mechanism to the combustion chamber by lubricating the horizontal guides.

COMPOSITION:

Copper (II) sulfate pentahydrate (CuSO4•5H2O) - Ammonium chloride (NH4Cl)

Product options